Dynojet 424x: Installation Guide - Manual (Page 156)

Above Ground Model 424x/424xLC 2 Automotive Dynamometer Installation Guide
A P P E N D I X C
Deck Relocation
C-4
5 Remove the two 3/8 x 1-inch bolts and two 3/8 x 1-inch nylock nuts securing the
two outside deck braces to the mounting brackets and set aside.
6 Remove the two outside deck braces and set aside.
7 Remove the two 3/8 x 1-inch bolts and two 3/8-inch lock washers securing the two
inside deck braces to the dyno and set aside.
8 Remove the two inside deck braces and set aside.
Figure C-3: Remove the Deck Braces
SA037
outside
deck brace
nuts
bolt
outside
deck brace
lock washer
bolt
bolt
inside
deck brace