Dynojet 424x: Installation Guide - Manual (Page 98)

Above Ground Model 424x/424xLC 2 Automotive Dynamometer Installation Guide
C H A P T E R 4
Eddy Current Brake Installation
4-6
7 Remove the five screws and nuts securing the front and rear covers. Set the
screws, nuts, and covers aside.
# RECORD
Be sure you record the dynamometer and/or eddy current brake number on
the inside cover of this manual.
Figure 4-5: Remove the Front and Rear Covers
EB170
front and rear covers
screw
nut
brake number