Dynojet 424x: Installation Guide User Manual
Page 88
Advertising
Above Ground Model 424x/424xLC
2
Automotive Dynamometer Installation Guide
C H A P T E R 3
Deck Installation
3-50
13 Install the tube to the outer panels and deck supports using four
3/8-16 x 3-inch flange hex bolts, four 3/8-inch flat washers, and four 3/8-inch
nylock nuts.
14 Install a plastic plug in each end of the tube.
Figure 3-36: Install the Tube
AD182
tube
plug
Advertising
This manual is related to the following products: