Dynojet 424x: Installation Guide User Manual
Page 162
Advertising
Above Ground Model 424x/424xLC
2
Automotive Dynamometer Installation Guide
A P P E N D I X C
Deck Relocation
C-10
12 Remove the two 3/8-16 x 1-inch bolts and two washers securing each deck brace
mounting bracket and set aside.
13 Remove the mounting bracket and set aside.
Note: If you have an eddy current brake, there will be only one mounting bracket.
14 Continue with installing the lift kit on page C-16.
Figure C-9: Remove the Deck Mounting Bracket
AD096
mounting bracket
mounting bracket
Advertising
This manual is related to the following products: