Dynojet 424x: Installation Guide - Manual (Page 165)

S T A T I O N A R Y D Y N O U P G R A D E
Deck Relocation
Version 8 Above Ground Model 424x/424xLC 2 Automotive Dynamometer Installation Guide
C-13
6 Loosely attach one outside brace to the mounting bracket using two 3/8 x 1-inch
bolts and two 3/8-inch nylock nuts.
7 Loosely attach one outside brace to the eddy current brake using two 3/8 x 1-inch
bolt and two 3/8-inch lock washers.
Note: If you do not have an eddy current brake, secure the brace to the mounting
bracket using two 3/8 x 1-inch bolts and two 3/8-inch nylock nuts.
8 Loosely attach the two inner braces to the dyno using two 3/8 x 1-inch bolts and
two 3/8-inch lock washers.
Note: Leave the bolts loose.
Figure C-12: Install the Deck Braces
AD504
inside deck
brace
outside deck
brace
outside deck
brace
mounting bracket