Dynojet 424x: Installation Guide - Manual (Page 87)

4 W D D Y N O I N S T A L L A T I O N
Deck Installation
Version 8 Above Ground Model 424x/424xLC 2 Automotive Dynamometer Installation Guide
3-49
9 Remove the center bolt from the drum guard.
10 Secure the supports to the outer panels using three 1/4-20 x 5/8-inch screws and
crush nuts each.
11 Secure the center panel to each support using three 1/4-20 x 5/8-inch screws and
crush nuts each.
12 Secure center panel to dyno with the center bolt removed earlier.
Figure 3-35: Install the Center Panel
AD181
center panel
support outer panel
center bolt