Dynojet 424x: Installation Guide User Manual
Page 32
Advertising
Above Ground Model 424x/424xLC
2
Automotive Dynamometer Installation Guide
C H A P T E R 2
Dyno Installation
2-8
8
With the dyno on the forklift, secure the four feet to the bottom of the dyno using
the four 3/8 x 1.5-inch flange bolts removed earlier.
Note: If the feet are already installed, skip this step.
Figure 2-2: Install the Feet
AD484
feet
Advertising
This manual is related to the following products: