Kontron TIGH2U Carrier Grade Server - Manual (Page 39)

Kontron Carrier Grade Server TIGH2U
December 2009 Product Guide, rev.1.2
39

Server Component Installations and Upgrades—TIGH2U Server
3.4.2.1 Memory RASUM Features
The MCH supports several memory Reliability, Availability, Serviceability, Usability, and Manageability
(RASUM) features. These features include the Intel ® x4 Single Device Data Correction (Intel ® x4
SDDC) for memory error detection and correction, memory scrubbing, retry on correctable errors,
memory built in self test, DIMM sparing, and memory mirroring. See the Intel ® S5000 Series
Chipsets Server Board Family Datasheet for more information about these features.
3.4.2.2 Supported Memory
The server board supports up to eight DDR2-533 or DDR2-667 Fully Buffered DIMMs (FBD memory).
The following tables show the maximum memory configurations supported using the specified
memory technology.
Table 8. Maximum Eight-DIMM System Memory Configuration - x8 Single Rank
DRAM Technology
x8 Single Rank
Maximum Capacity
Mirrored Mode
Maximum Capacity
Non-Mirrored Mode
256 Mbit 1 GB 2 GB
512 Mbit 2 GB 4 GB
1024 Mbit 4 GB 8 GB
2048 Mbit 8 GB 16 GB
Table 9. Maximum Eight-DIMM System Memory Configuration - x4 Dual Rank
DRAM Technology
x4 Dual Rank
Maximum Capacity
Mirrored Mode
Maximum Capacity
Non-Mirrored Mode
256 Mbit 4 GB 8 GB
512 Mbit 8 GB 16 GB
1024 Mbit 16 GB 32 GB
2048 Mbit 16 GB 32 GB
Note: DDR2 DIMMs that are not fully buffered are not supported. See 
http://www.cmtlabs.com/
mbSearchResults.asp?sManuf+Kontron&sMem=FBDIMM&sMN=S50000PHB&oSubmit=
Search 
for a list of supported memory.