Kontron TIGH2U Carrier Grade Server - Manual (Page 9)

TIGH2U Server—Introduction
Kontron Carrier Grade Server TIGH2U
Product Guide, rev.1.2 December 2009
12
1.2 What Your Server Includes
Your Kontron Carrier Grade Server TIGH2U includes the following components:
• One Intel ® Server Board T5000PAL
• One 2U chassis
• Six internal hard disk drive trays in a removable drive bay assembly. A SAS backplane board is
attached to the rear of the drive bay assembly.
• A riser card assembly for PCI-X* and PCI Express* (PCIe*) add-in cards
• DC or AC power subsystem: one hot-swappable PSU and power distribution board (PDB). You
must order a second power supply for a redundant system.
• Four dual-rotor fan assemblies for cooling the processor(s), DIMM(s), PCI slot(s), power supply
modules, and other internal components
• SAS front panel (SFP) board
• Telco Alarms Manager (TAM) board
• Internal cables and connectors
See Chapter 3 for initial system installation and configuration instructions. See Chapter 4 for optional
component installation and configuration instructions.
1.3 Product Accessories
You may need or want to purchase one or more of the following items for your server as spares or for
more processing power:
• Quad-Core Intel ® Xeon ® processor 5400 series and appropriate heat sink(s)
• DDR2-667 FBD ECC memory DIMM(s) (system maximum = 32 Gbytes)
• SAS hard disk drives (system maximum = six HDDs)
• 0.5-inch slim-line optical drive
• PCI-X* or PCIe* add-in cards
• Additional AC or DC power supply for redundancy and hot-swapping
• Intel
® Remote Management Module 2 (Intel ® RMM2) and RMM2 NIC module
• I/O expansion module for dual-GbE or 4xSAS external drive support
• SMART Embedded USB Solid-State Drive
For information about the accessories, memory, processors, and third-party hardware that have been
tested and can be used with your system, and for ordering information, see the accessories and
spares list on
http://us. kontron.com/support/