Kontron TIGH2U Carrier Grade Server - Manual (Page 84)

TIGH2U Server—Server Component Replacements
Kontron Carrier Grade Server TIGH2U
Product Guide, rev.1.2 December 2009
84
5.3.1 Removing the TAM Board
1. Remove the chassis cover. For instructions, see Section 3.2.3, “Removing the Chassis Cover” on
page 26 .
2. Remove the processor air duct. For instructions, see Section 3.2.5, “Removing the Processor Air
Duct” on page 28 .
3. Disconnect the TAM cable. (“A”)
4. Disconnect the FPIO cable. (“C”)
5. Disconnect the SMART eUSB SDD cable if the solid state drive is installed. (“B”)
Figure 65. Cable Connections on TAM Board
TS000444
SFP Board
C
A
Solid State Drive
TAM Board
B
Item Description Item Description
A TAM cable C FPIO cable
B
SMART Embedded USB Solid-State Drive
cable