Kontron TIGH2U Carrier Grade Server - Manual (Page 41)

Kontron Carrier Grade Server TIGH2U
December 2009 Product Guide, rev.1.2
41

Server Component Installations and Upgrades—TIGH2U Server
3.4.2.4 Non-Mirrored Mode Minimum Configuration
The server board can be operated with only one DIMM. For better system performance, Kontron
recommends that at least two DIMMs be installed.
Figure 23 shows the recommended minimum DIMM memory configuration. Populated DIMM sockets
are shown in grey.
Figure 23. Recommended Minimum Two-DIMM Memory Configuration
Note: The server board supports single DIMM mode operation. Kontron will only validate and
support this configuration with a single 512 MB x8 FBDIMM installed in DIMM socket
A1.