Kontron TIGH2U Carrier Grade Server - Manual (Page 98)

TIGH2U Server—Server Component Replacements
Kontron Carrier Grade Server TIGH2U
Product Guide, rev.1.2 December 2009
98
9. Disconnect the five power cables from the server board and from the SFP board.
10. Press and hold down the metal clip at the base of the PDB assembly. ( Figure 77 , “A”)
11. Pull the PDB assembly from the placement pegs. (“B”).
12. Lift the PDB from the chassis (“C”).
Figure 77. Removing the PDB
A
B
C
TS000438