Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 2.3 - Manual (Page 21)

Counterpart User Manual - Installation 15
bracket, otherwise it will not fit.
Ensure the cable from
the underside of the scale is
run between bracket and
s c a l e p ri o r t o a t t a c h i n g
Note
Figure 2-12. Attach Bracket Assembly to Scale Base While Scale is Tipped on its Side.
3. Set scale base down on a flat surface positioning the bracket assembly at the edge of a table.
4. Attach the indicator to the bracket using the second set of screws provided and screw white feet into
indicator base as shown below.
Figure 2-13. Shown - Indicator Attached to the Scale Base