Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 2.3 - Manual (Page 80)

74 Counterpart User Manual
7.2.2 Using the Front Panel
If you have no access to equipment for communication through the EDP port or are working at a site where such
equipment cannot be used, you can use the
PFORMT menu (see Figure 7-1) to customize the print formats.
SCALES FEATURE SERIAL PFORMT VERS DIGIO
Scroll left in formatting string
Press INSERT to enter a space
before the active character
Press CLR to delete the character to the left
Scroll right in formatting string
NOTE: To change the active character,
use the alpha keypad to enter the new
value.
XXXXXXX ID ACCUM DISPLAY TEST SETUP AUDIT CALIBR
CONFIG
ETHERNET VERS
Same as GFMT
GFMT NFMT CFMT
Format
PALFMT ACCFMT H1 H2 TOTALFMT
PORT
Format Format
SPFMT
Format
Figure 7-1. PFORMT Menu, Showing Alphanumeric Character Entry Procedure
7.2.3 Using Revolution ®
The Revolution configuration utility provides a print formatting grid with a tool bar. The grid allows you to
construct the print format without the formatting commands (<NL> and <SP>) required by the front panel or
EDP command methods. Using
Revolution , you can type text directly into the grid, then select weight value
fields from the tool bar and place them where you want them to appear on the printed ticket.
Figure 7-2 shows an example of the Revolution print formatting grid.
Figure 7-2. Revolution Print Format Grid