Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 2.3 - Manual (Page 73)

Counterpart User Manual - Serial Commands 67
OPTCARD Option cards NONE, FIBER, ETHERNET, WI-PORT, RESERVED, USB,
RS232-422, KEYBOARD
Table 6-6. FEATURE Serial Commands
Command Description Values
CFGPWD Configuration password 0, 1–9999999
CONSNUM Consecutive numbering 0–9999999
CONSTUP Consecutive number start-up value 0–9999999
DATEFMT Date format MMDDYYYY, DDMMYYYY, YYYYMMDD, YYYYDDMM
DATESEP Date separator SLASH, DASH, SEMI
DECFMT Decimal format DOT, COMMA
DSPBRIGHT Sets display intensity 0 (dimmest), through 100 (brightest as a percentage)
KYBDLK Keyboard lock (disable keypad) OFF, ON
REG.AGENCY Regulatory compliance NONE, OIML, NTEP, CANADA, INDUST
REGULAT=NTEP Regulatory compliance NONE, OIML, NTEP, CANADA, INDUST
REG.CTARE Allow clear keyed tare NO, YES
REG.WORD Weighing mode Gross, Brutto
REG.KTARE Always allow keyed tare NO, YES
REG.MTARE Multiple tare action REPLACE, REMOVE, NOTHING
REG.NTARE Allow negative tare NO, YES
REG.ZTARE Remove tare on ZERO NO, YES
REG.BASE Zero base for overload calculation CALIB, SCALE
REG.PRTMOT Allow print while in motion NO, YES
REG.PRINTPT Add PT to keyed tare print NO, YES
REG.SNPSHOT Display or Scale weight source DISPLAY, SCALE
TIMEFMT Time format 12HOUR, 24HOUR
TIMESEP Time separator COLON, COMMA
SK#1 - SK#12 Softkey Assignment BLANK, TIMEDATE, CLRTAR, DSPTAR, DSPACC, SCLSEL,
CODE, LOT, PRINTLOT, SWAPDSP, IN, OUT, CLRCN,
TOTAL+, TOTAL-, CLRTTL, UWUPDT, TAREUPDT, SETPT,
BATSTRT, BATSTOP, BATPAUSE, BATRST
Table 6-7. PFORMT Serial Commands
Command Description Values
GFMT.FMT Gross print format string See Section 7.0 on page 70 for information about demand print
format strings.
NFMT.FMT Net print format string
ACC.FMT Accumulator print format string
CFMT.FMT Count print format string
TOTAL.FMT Total print format string
SPFMT.FMT Setpoint print format string
HDRFMT1 Header 1 print format string
PALFMT.FMT Pallet print format string
HDRFMT2 Header 2 print format string
Command Description Values
Table 6-5. SERIAL Port Serial Commands (Continued)