Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 2.3 - Manual (Page 25)

Counterpart User Manual - Configuration 19
3.0 Configuration
3.1 Front Panel Configuration
To set up and configure the Counterpart counting Scale, you will use the MENU key on the front panel. The
indicator is defaulted at the factory with the audit trail jumper (JMP1) in the ON position, allowing configuration
access by pressing the
Menu key. Pressing the MENU key will take you to the Audit menu selection. Use the
SAMPLE ( ) and PRINT ( ) navigation keys to move to other menu selections. Use the NET/GROSS ( ) and
ZERO ( ) navigation keys to enter and exit menu selections, respectively.
AUDIT CALIBR SETUP TEST DISPLAY ID SETPTS
Figure 3-1.
Table 3-1. Menu Summary
Menu Function
ID ID Allows you to setup or edit IDs.
AUDIT Audit Trail Displays the legally relevant (LR) firmware version, configuration count, and calibration
count.
CALIBR Calibrate Calibrates the scale.
SETUP Setup Accesses setup options for the scale, features, serial output, print format, digital inputs
and outputs, and displays the version number.
TEST Test Performs a basic test on the A/D, digital inputs and outputs, communication ports, RAM,
and keypad.
DISPLAY Display Accesses the setup option for contrast, image, brightness
SETPTS Setpoints For setting up weighmode setpoint accessible parameters using numeric values
Menu Mode Navigation Structure
3.2 Menu Navigation
Once you have entered the menus, you can use the front panel buttons to navigate. Note the looped menu
structure shown in Figure 3-1. This provides a shortcut for accessing the right most menu items by navigating to
the left, and vice-versa for the opposite side of the menu. This shortcut also holds true for sub-menu navigation.
ZERO
B/N
GROSS
NET
TARE SAMPLE
Pieces
PRINT
UNIT
WEIGHT
MENU
SETUP
UNITS
TOGGLE
Move UP/
Increment
value
Move
DOWN/
Increment
Value
Enter Key Move
LEFT/
previous
Enter
MORE/
Move
forward/
Figure 3-2. Front Panel Key Functions in Menu Mode