Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 2.3 - Manual (Page 76)

70 Counterpart User Manual
7.0 Print Formatting
The Counterpart provides nine print formats, GFMT, NFMT, TOTALFMT, PALFMT, CFMT, ACCFMT, SPFMT,
HDRFMT1 , and HDRFMT2 . These determine the format of the printed output when the PRINT key is pressed or
when a KPRINT EDP command is received. The HDRFMT s must be called from another format. The SPFMT
(setpoint print format) is printed from a setpoint routine.
Each print format can be customized to include up to 500 characters of information, two header formats are
limited to 100 characters each), such as company names and addresses, on printed tickets. You can use the
indicator front panel (
PFORMT menu), EDP commands, or the Revolution
® configuration utility to customize
the print formats.
Note
Print formats are limited to 500 characters. The two header formats are limited to 100 characters
each
.
7.1 Print Formatting Commands
Table 7-1 lists commands you can use to format the gross, net and count print formats. Commands included in
the format strings must be enclosed between < and > delimiters. Any characters outside of the delimiters are
printed as text on the ticket.
.