Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 2.3 - Manual (Page 27)

Counterpart User Manual - Configuration 21
3.4 Audit Menu
The audit menu accesses audit trail support. It provides tracking information for configuration and calibration
events. To prevent potential misuse, all configuration and calibration changes are counted as change events.
Audit information can be printed by pressing the
PRINT key while displaying the audit trail items beneath the
AUDIT menu.
LRV CALIB CFG
XXXXXXX ID DISPLAY TEST SETUP AUDIT CALIBR SETPTS
Figure 3-4. Audit Menu
Table 3-2. Audit Menu Parameters
AUDIT Menu
Parameter Description
LRV Legally relevant firmware version.
CALIB Displays total calibration events.
CFG Displays total configuration events.
3.5 Menu Structures and Parameter Descriptions
The Counterpart scale can be configured using a series of menus accessed through the scale front panel when the
scale is in setup mode. Figure 3-5 and Table
AUDIT CALIBR SETUP TEST DISPLAY ID
SCALES FEATURE SERIAL ETHERNET PFORMT
CONFIG
VERS DIGIO SETPTS
SETPTS
summarizes the functions of each of the top level menus.
Figure 3-5. Top Level Configuration Menu
The Counterpart counting scale can be configured using a series of menus accessed through the display front
panel when the scale is in setup mode. The top level menu structure includes the following:
Menu Menu Function
ID ID Sets up IDs of various parts
AUDIT Audit Trail View audit trail data
CALIBR Calibration Calibrate Counterpart through this menu
SETUP Setup Set up the configuration parameters
TEST Test Menu Test functionality
DISPLAY Display Sets up the display parameters of Counterpart
SETPTS Setpoints For weigh mode setpoint access
.