Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 2.3 - Manual (Page 78)

72 Counterpart User Manual
<SCV> Setpoint captured weight value SPFMT
<SN> Setpoint weight number
<STV> Setpoint target weightvalue
<SPV> Setpoint preact weight value
<SPM> Setpoint weight mode
<SCVC> Setpoint captured count value
<STVC> Setpoint target count value
<SPVC> Setpoing preact count value
Gross, net, and tare weights are 8 digits in length, including sign and decimal point, followed by a
space and a one- to five-digit units identifier. Total field length with units identifier is 10-14 characters.
Depending on what units are configured, the units identifier will be lb, oz, g, or kg.
Gross, net, tare, and accumulator weights can be printed in any configured weight units by adding the
following modifiers to the gross, net, tare, and accumulator weight commands: /P (primary units), /D
(displayed units), /S (secondary units), /T (tertiary units). If not specified, the current displayed units (/
D) is assumed. Example: To format a ticket to show net weight in secondary units, use the following
command: <N/S>.
UNIT ID and consecutive number (CN) fields are 1–6 characters in length, as required.
* If nn is not specified, 1 is assumed. Value must be in the range 1–99.
** After receiving an SU command, the indicator sends unformatted data until the next SU command
is received. Unformatted data omits decimal points, leading and trailing characters.
Format Default Format String Used When
NFMT
N<NL>A30,75,0,4,1,1,N,"Gross:
<G>"<NL>B30,115,0,3,2,4,101,B,"<G>"<NL>A30,300,0,4,1,1,N,
"Tare: <T>"<NL>B30,340,0,3,2,4,101,B,"<T>"<NL>A30,525,0,4,1,1,N,
"Net: <N>"<NL>B30,565,0,3,2,4,101,B,"<N>"<NL>A30,806,0,3,1,1,N,"<TD>"<NL>
P1<NL>
Normal mode, tare in
system
PALFMT
N<NL>A416,25,1,4,1,1,N,"ID CODE:
<IDC>"<NL>B378,25,1,3,2,4,51,N,"3<IDC>"<NL>A296,28,1,4,1,1,N,"Total QTY:
<C>"<NL>B264,22,1,3,2,4,51,N,"<C>"<NL>
A179,25,1,4,1,1,N,"Part Name: <IDD>"<NL>A126,25,1,4,1,1,N,"Part Number:
<IDP>"<NL>A73,25,1,4,1,1,N,"Lot Number: <IDLT>"<NL>P1<NL>
When Print Pallet
softkey is pressed
CFMT
N<NL>B371,20,1,3,2,4,51,N,"3<IDC>"<NL>A410,20,1,4,1,1,N,"ID. CODE:
<IDC>"<NL>A302,22,1,4,1,1,N,"QTY:
<C>"<NL>B264,20,1,3,2,4,51,N,"<C>"<NL>A280,400,1,4,1,1,N,"GROSS
<G>"<NL>
A225,400,1,4,1,1,N,"TARE
<T>"<NL>B189,355,1,3,2,4,51,N,"4<T>"<NL>A120,400,1,4,1,1,N,"NET
<N>"<NL>A195,24,1,4,1,1,N,"WT/K OR U
W"<NL>B124,20,1,3,2,4,51,N,"1<IDW>"<NL>
A47,16,1,4,1,1,N,"<TD>"<NL>A160,24,1,4,1,1,N,"<IDW>"<NL>P1<NL>
Count mode
GFMT
N<NL>A376,47,1,4,4,3,N”G<G>”<NL>B233,73,1,3,2,4,101,B”<G>”<NL>A73,77,1,
4,1,1,N”<TD>”<NL>P1<NL>
Normal mode, no tare in
system
Table 7-2. Default Print Formats
Command Description
Supported Ticket
Formats
Table 7-1. Print Format Commands