Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 2.3 - Manual (Page 37)

Counterpart User Manual - Configuration 31
DISPMODE COUNT
WEIGHT
UNITWEIGHT Display mode. This chooses the value to be displayed as large in viewing window.
REMOVTSP ON
OFF Removes trailing spaces from ID Codes.
• ON - If set to on;

- an ID code configured through the ID menu will have any entered trailing spaces
removed before being stored.

- an ID code configured through the ID.CODE EDP command will have any entered
trailing spaces removed prior to being stored.

- trailing spaces will be removed from an ID Code that is entered via the Code softkey.
This includes using the front panel or USB keyboard.

- trailing spaces will be removed from an ID Code that is scanned from a barcode.
• OFF - If set to off:

- an ID code configured through the ID menu will be stored with trailing spaces as entered

- an ID code configured through the ID.CODE.EDP command will be stored with trailing
spaces as entered.

- an ID code entered via the Code softkey for recall will retain any trailing spaces. This
includes using the front panel or USB keyboard.

- an ID Code scanned from a barcode for recall will retain any trailing spaces
Level 4 submenus - under the Level 3 Region Feature
REGULA NTEP
CANADA
INDUST
NONE
OIML Regulatory mode. Specifies the regulatory agency having jurisdiction over the scale site.
Note
The value specified for REGULA affects the function of the front panel TARE and
ZERO keys.
• OIML, NTEP, and CANADA modes allow a tare to be acquired at any weight greater
than zero. NONE allows tares to be acquired at any weight value.
• OIML, NTEP, and CANADA modes allow a tare to be cleared only if the gross weight
is at no load. NONE allows tares to be cleared at any weight value.
• NTEP and OIML modes allow a new tare to be acquired even if a tare is already
present. In CANADA mode, the previous tare must be cleared before a new tare can
be acquired.
• NONE, NTEP and CANADA modes allow the scale to be zeroed in either gross or net
mode as long as the current weight is within the specified ZRANGE. In OIML mode,
the scale must be in gross mode before it can be zeroed; pressing the ZERO key in
net mode clears the tare.
• INDUST provides a set of subparameters to allow customization of tare, clear, and
print functions in non-legal-for-trade scale installations.
When in Legal-for-Trade mode, refer to Section 9.9.1 for more information on using this feature.
REGWOR GROSS
BRUTTO Sets the term printed when weighing in gross mode. Selecting BRUTTO replaces Gross with
Brutto.
DECFMT DOT
COMMA Specifies whether decimal numbers are displayed using a period (DOT) or a comma.
TIME TFORMT
T SEP Allows you to set the current time, and the time format and separator character.
DATE DFORMT
D SEP Allows you to set the current date, and date format and date separator character.
Level 4 submenus - under the Level 3 Consec # Feature
CURVAL 0 This is the starting number.
RESVAL 0 This is the ending/reset value.
Level 4 submenus - under the Level 3 Password Feature
FEATUR Menu
Parameter Choices Description
Table 3-5. FEATUR Submenu Parameters (Continued)