Rice Lake MSI-9850 CellScale RF Digital Indicator - Operator Manual User Manual

Page 39

Advertising

MSI CellScale

System • 9850 User Guide Page 39

MEASUREMENT SYSTEMS INTERNATIONAL

Firmware Version 5-XX for 2450 Modems

Print Aux to Comm 1

...Sends the Aux 1 string directly to Comm Port 1.

Print Aux to Comm 2

...Sends the Aux 2 string directly to Comm Port 2.

Print Aux to Comm’s

...Sends both Aux strings to their respective Comm Ports.

Send to CSRF Host 1

...Tells the Master CellScale to output its Host 1 output string (CellScale local Comm

Port)

Send to CSRF Host 3

...Tells the Master CellScale to output it’s Host3 print string.

Send to CSRF Host 4

...Tells the Master CellScale to output it’s Host1 print string.

Send to CSRF Host 5

...Tells the Master CellScale to output it’s Host5 print string.

Send to CSRF Hosts

....Tells the Master CellScale to output all connected print strings.

Print 1 Send Host 1

......Outputs Comm 1 print string to the Comm 1 connector, and tells the CellScale to output

it’s Host1 print string.

Print 2 Send Host 1

......Outputs Comm 2 print string to the Comm 2 connector, and tells the CellScale to output

it’s Host1 print string.

Print & Send Host 1

.....Outputs both 9850 Comm Port print strings out their respective connectors, and tells

the CellScale to output it’s Host1 print string.

Print 1 Send Host 3

......Outputs Comm 1 print string to the Comm 1 connector, and tells the CellScale to output

it’s Host3 print string.

Print 2 Send Host 3

......Outputs Comm 2 print string to the Comm 2 connector, and tells the CellScale to output

it’s Host3 print string.

Print & Send Host 3

.....Outputs both 9850 Comm Port print strings out their respective connectors, and tells

the CellScale to output it’s Host3 print string.

Print 1 Send Host 4

......Outputs Comm 1 print string to the Comm 1 connector, and tells the CellScale to output

it’s Host4 print string.

Print 2 Send Host 4

......Outputs Comm 2 print string to the Comm 2 connector, and tells the CellScale to output

it’s Host4 print string.

Print & Send Host 4

.....Outputs both 9850 Comm Port print strings out their respective connectors, and tells

the CellScale to output it’s Host4 print string.

Print 1 Send Host 5

......Outputs Comm 1 print string to the Comm 1 connector, and tells the CellScale to output

it’s Host5 print string.

Print 2 Send Host 5

......Outputs Comm 2 print string to the Comm 2 connector, and tells the CellScale to output

it’s Host5 print string.

Print & Send Host 5

.....Outputs both 9850 Comm Port print strings out their respective connectors, and tells

the CellScale to output it’s Host5 print string.

Send All & Print 1

.........Tells the CellScale to output all of its print strings and the 9850 to output the Comm

Port 1 String.

Send All & Print 2

.........Tells the CellScale to output all of its print strings and the 9850 to output the Comm

Port 2 String.

Send All & Print All

.......Tells the CellScale to output all of its print strings and the 9850 to output both Comm

Port Strings.

Start/Stop Comm 1

.......If the Comm 1 print string is set to an automatic or continuous output mode, this func-

tion key will act as a start/stop print key.

Start/Stop Comm 2

.......If the Comm 2 print string is set to an automatic or continuous output mode, this func-

tion key will act as a start/stop print key.

5 – Edit Strings

Edit CS String

..............Allows direct entry into the Master CellScale Comm 1 print string edit screen. This

print string outputs on the CellScale Comm Port 1 connector.

Edit Print String

.........Allows direct entry into the 9850 Comm 1 print string edit screen. This is the print

string used for Data Logging as well as printing out the 9850 Comm Port 1.

Edit Print String

.........Allows direct entry into the 9850 Comm 2 print string edit screen. This is the print

string used for printing out the 9850 Comm Port 2.

Edit Aux String

...........Allows direct entry into the 9850 Comm 1 aux print string edit screen.

Edit Aux String

...........Allows direct entry into the 9850 Comm 2 aux print string edit screen.

Edit CSRF Host 3

..........Allows the 9850 to edit the CellScales RF Host 3 string which is used to communicate

with remote modems.

Edit CSRF Host 4

..........Allows the 9850 to edit the CellScales RF Host 4 string which is used to communicate

with remote modems.

Edit CSRF Host 5

..........Allows the 9850 to edit the CellScales RF Host 5 string which is used to communicate

with remote modems.

Go to Index

Advertising

This manual is related to the following products:

MSI-9850 CellScale RF Digital Indicator, MSI9850 RF Remote Indicator

Popular Brands

Popular manuals