CANOGA PERKINS CanogaOS Configuration Guide - Manual (Page 125)

CanogaOS Configuration Guide
Proprietary & Confidential Canoga Perkins Metro Ethernet Switches Page 125 of 350
17.6 Redistributing Routes into OSPF
In this example the configuration causes BGP routes to be imported into the OSPF routing table
and advertised as Type 5 External LSAs into Area 0.
17.6.1 Terminology
17.6.2 Configurations
R1
DUT# configure terminal Enter the Configure mode.
DUT(config)# router ospf 100 Configure the Routing process and specify the Process
ID (100). The Process ID should be a unique positive
integer identifying the routing process.