4 configuring static unicast address, 5 configuring static multicast address – CANOGA PERKINS CanogaOS Configuration Guide User Manual
Page 40
CanogaOS Configuration Guide
Proprietary & Confidential Canoga Perkins Metro Ethernet Switches
Page 40 of 350
DUT(config)#end
Exit to exec mode.
DUT#show mac address-table ageing-time
Display address aging time.
6.3.3 Validation Commands
Bridge 1
DUT#show mac address-table ageing-time
MAC address table ageing time is 10 seconds
6.4 Configuring Static Unicast Address
Unicast address can be only bind to one port.
6.4.1 Topology
6.4.2 Configurations
Bridge 1
DUT#configure terminal
Enter the Configure mode.
DUT(config)#mac-address-table 0000.1234.5678
forward eth-0-1 vlan 1
Add static unicast address.
DUT(config)#end
Exit to exec mode.
DUT#show mac address-table
Display MAC address table.
6.4.3 Validation Commands
Bridge 1
DUT#show mac address-table
VLAN port mac fwd static security
1 eth-0-1 0000.1234.5678 1 1 0
6.5 Configuring Static Multicast Address
Multicast address can be bind to multi-port.
6.5.1 Topology