CANOGA PERKINS CanogaOS Configuration Guide - Manual (Page 198)

CanogaOS Configuration Guide
Proprietary & Confidential Canoga Perkins Metro Ethernet Switches Page 198 of 350
Switch C output
(1) Check the route on Switch C
DUT1#show ip route
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
[*] - [AD/Metric]
* - candidate default
C 1.1.1.0/24 is directly connected, eth-0-9
C 3.3.3.0/24 is directly connected, eth-0-1
K 192.168.100.0/24 is kernel directly connected, management interface
(2) Switch B and Switch C are in different VRF, so Switch C can’t ping Switch B’s
address
DUT1#ping 4.4.4.1
connect: Network is unreachable
Switch D output
(1) Check the route on Switch D in different VRFs
DUT1#show ip route vrf vpn1
Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
[*] - [AD/Metric]
* - candidate default
C 1.1.1.0/24 is directly connected, eth-0-13
C 2.2.2.0/24 is directly connected, eth-0-20
R 3.3.3.0/24 [120/2] via 1.1.1.1, eth-0-13, 00:26:32