Conneeting a tv, Audio connections, Video connections – Yamaha YSP-1100 User Manual
Page 20: Note, Cables used for audio connections, Cables used for video connections, Connecting a tv
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Conneeting a TV
Connect a TV to this unit and display the OSD for easy viewing when you adjust the system parameters in SET MENU.
■ Audio connections
Connect the analog audio output jacks of your TV to the
TV/STB AUDIO IN jacks of this unit. If your TV has an
optical digital output jack, connect the optical digital
output jack of your TV to the TV/STB OPTICAL
DIGITAL IN jack of this unit in addition to the analog
audio connection. Once the digital audio connection is
made, digital audio signals can be input to this unit during
■ Video connections
Connect the video input jacks of your TV to the VIDEO
OUT jacks of this unit. If your TV has component video
input jacks, connect the component video input jacks of
your TV to the COMPONENT VIDEO OUT jacks of this
unit in addition to the composite video connection. Once
the component video connection is made, you can enjoy
images with better resolution.
• The circuits of composite and component video signals are independent of each other.
• To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 15).
If you connect this unit to the analog audio and optical digital audio output jacks at the same time as shown in the left illustration below,
the digital audio signals output at the optical digital output jack take priority over the analog audio signals output at the analog audio
Cables used for audio connections
Cables used for video connections
Audio pin cable (supplied)
Video pin cable (supplied)
Component video pin cable
Optical cable (supplied)
^ 1 ))
....................M-......Jill 1 ц