Adfusting surround mode parameters, 2 press to select the parameter, When dolby pro logic ii music is selected – Yamaha YSP-1100 User Manual
Page 50: Panorama, Dimension, Ct width, When dts neo:6 music is selected c. image, 3 press <1 /1> to configure the parameter, Adjusting surround mode parameters
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ENJOYING SURROUND SOUND
Adfusting surround mode
You can configure the parameters for Dolby Pro Logic II
Music and DTS Neo:6 Music to fine-tune the surround
Repeat steps 1 and 2 in “Enjoying 2-channef
sources in surround sound” on page 45 and
select PL II Music or Neo:6 Music.
select the parameter.
When Dolby Pro Logic II Music is
Gives front left and right channel sound a wraparound
effect, distributed throughout the entire surround
sound field to give you an expansive feeling.
Default setting: OFF
Adjusts the difference in volume between front and
surround channels to the volume balance you desire.
Control range: -3 (toward the surround direction) to
+3 (toward the front direction)
Default setting: STD
Distributes the center channel sound to the left and
right. If set to 0, center channel sounds output only
from the center channel.
Control range: 0 to 7
Default setting: 3
When DTS Neo:6 Music is selected
Adjusts the center image from three channels (front
and center) to varying degrees.
Control range: 0.0 (wider) to 1.0 (toward the center)
Default setting: 0.3
Press <1 /1> to configure the parameter.