Adjusting system parameters, Using the system parameters, Setting the mmory protect – Yamaha YSP-1100 User Manual
Page 80
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ADJUSTING SYSTEM PARAMETERS
This unit has additional menus that are displayed in the front panel display. These menus offer additional operations to
adjust and customize the way this unit operates.
Using the system parameters
Follow the procedure below to enter the system
parameters.
3
Release INPUT on the front panel.
□
INPUT
Setting the mMORY PROTECT
You can protect the settings you saved in the system
memory of this unit from being accidentally erased or
unwantedly changed.
1
Repeat steps 1 to 3 in “Using the system
parameters” on this page.
2
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
mAv_
1
Press STANDBY/ON on the front panel to
turn off the power of this unit.
Press and hold INPUT on the front panel and
then press STANDBY/ON on the front panel
to turn on the power of this unit.
MEMORY PROTECT is shown in the front panel
display.
STANDBY/ON
3
Confirm that MEMORY PROTECT is shown in
the front panel display and then press
ENTER.
MEMORV PROTECT
MEMORV PROTECT
76
En