Osd set (osd settings), Osd shift (osd shift), Osd back color (osd background color) – Yamaha YSP-1100 User Manual
Page 75: Unit set (unit settings), Note, Ohill sei
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ OSD SET (OSD settings)
Use to adjust the display position and the background
color of the OSD.
4 OSD SHIFT.........
OSD BACK COLOR"■
OSD SHIFT (OSD shift)
Use to adjust the vertical position of the OSD. Adjust
towards the - (minus) direction to raise the position of the
OSD, and adjust towards the + (plus) direction to lower it.
Choices: -5 to +5
Initial setting: 0
OSD BACK COLOR (OSD background color)
Use to select the background color of the OSD.
■ UNIT SET (Unit settings)
Use this to change the display unit of measurement.
(Australia and U.K. models),
• Select METERS to input distances in meters.
• Select FEET to input distances in feet.
If you change this setting, the adjusted beam settings may change.