Yamaha YSP-1100 - Manual (Page 88)

REMOTE CONTROL FEATURES
Using the TV macro
The TV macro feature makes it possible to perform a
series of operations with the press of a single button. For
example, when you want to play a DVD, you would
normally turn on the component, select DVD as the input
source and press the play button to start playback. The TV
macro feature lets you perform all of these operations
simply by pressing the DVD macro button.
Notes
• Be sure to set up a remote control code for your TV before
setting macros.
• The ways to set macros differ if your TV does not have the
tuning capability.
• If you press any control buttons on the remote control other than
the ones used to set macros while setting macros, the setting
procedure is automatically canceled.
• If it takes more than 10 seconds in steps 2 and 3, the setting
procedure is automatically canceled. In this case, repeat from
step 1.
Setting macros for the TV with the
tuning capabiiity
Press and hold CODE SET on the remote
control and then press one of the input
selector buttons to select the input source
you want to set macros for.
Proceed to step 2 while holding down CODE SET.
TV MUTE I ST b J I VCR.1 I DVD.J | AUxJ
While holding ----- Y ) -------- Y " ) ------ Y
down, press
CODE SET\ Q...,
I c
3a
2
Press MACRO on the remote control while
holding down CODE SET.
TV MUTE MACRO
While holding
down, press Ri
Press CH +/- or the numeric buttons to select
the TV channel.
Check that the TV screen changes to the tuner screen.
5BEAM ST+3BEAM 3BEAM
Q Q Q
STEREO MY BEAM SURROUND
Q H fi
I SPORTS
Q
Press TV INPUT on the remote control
repeatedly so that the screen changes to the
display of the input source selected in step 1.
Press ENTER on the remote control to
confirm the macro setting.
84
En