Using set menu, Displaying the osd, Note – Yamaha YSP-1100 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USING SET MENU
Displaying the OSD
This section simply describes how to display the OSD (on-screen display) of this unit on your TV screen and set the
parameters for your listening room. Once this is complete, you can enjoy real surround sound while watching TV in the
comfort of your own home.
Note
The OSD is not output at the COMPONENT VIDEO OUT jacks of this unit. Connect the VIDEO OUT jack of this unit to the video
input jacks of your TV to display the OSD.
II
Press TV on the remote control to display the
OSD of this unit on your TV screen.
It may take a few seconds before this unit’s OSD
appears on your TV screen.
If the OSD does not appear, use the remote control
provided with your TV to switch the video input until
the OSD appears.
OSD screen example
1
Check that the video input jack on your TV is
connected to the VIDEO OUT Jacks of this
unit to display the OSD of this unit.
2
Press STANDBY/ON on the front panel or on
the remote control to turn on the power of
this unit.
Front panel
Remote control
3
Turn on the power of your TV.
4
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
u
26
En