Selecting the input mode, Auto, Analog – Yamaha YSP-1100 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SELECTING THE INPUT MODE
You can select the type of audio input signals of the selected input source according to your preference or the conditions
of the input source.
We recommend setting the input mode to AUTO in most cases.
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
Press one of the input selector buttons on
the remote control to select the desired input
• The input mode of VCR is fixed to ANALOG. However, if the
TV OPTICAL IN jack of this unit is assigned to VCR, AUTO,
DTS and ANALOG become available as the input mode of
VCR (see page 68).
• ANALOG is not available as the input mode of DVD and AUX.
Automatically selects audio input signals in the following
1) Dolby Digital or DTS
Use this input mode in most cases.
Selects only digital signals encoded in DTS.
Compared to AUTO, this input mode provides greater
stability while playing back CDs or LDs encoded in DTS.
Selects only analog signals.
Even when both digital and analog signals are input
simultaneously, only analog signals are selected.
You can adjust the default input mode to be selected when the
power of this unit is turned on (see page 69).
Press INPUTMODE on the remote control
repeatedly to toggle between input modes.
> TU fUJTO
When TV or STB
is selected as
the input source
When DVD Is
selected as the
When AUX is
selected as the