Dd/dts dynamic range, Dynamic range of doiby digitai and dts signais), Input assignment (input assignment) – Yamaha YSP-1100 User Manual
Page 72: Input menu
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ DD/DTS Dynamic Range
(Dynamic range of Doiby Digitai and
Use to select the amount of dynamic range compression.
This setting is effective only when the unit is decoding
Dolby Digital and DTS signals. Dynamic range is the
difference between the smallest sound that can be heard
above the noise of the equipment and the biggest sound
that can be heard without distortion.
Choices: MIN (minimum), STD (standard),
F)uii/i)Ii Siiiiafdi i?3(i5s
Select to adjust the dynamic range compression.
• Select MIN for listening to sources at low volume
• Select STD for general use.
• Select MAX for feature films.
Use to manually adjust various parameters related to the
audio and video input.
SET MENU -> MANUAL SETUP INPUT MENU
■ fl>INPUT ASSIGNMENT
■ INPUT ASSIGNMENT (Input assignment)
Use to assign the input jacks of this unit to other
components if the initial settings of this unit do not
correspond to your needs. By assigning other components
to the input jacks on this unit, you can display the name of
the connected component in the front panel display and
OSD, and operate the component with the input selector
button of the same name. If you connect a component to
the input jacks of this unit and do not assign it, the default
component name for that input jack is displayed in the
front panel and OSD when selected.
• Select OPTICAL IN (1) to assign components to the
TV OPTICAL IN jack of this unit.
• Select OPTICAL IN (2) to assign components to the
AUX OPTICAL DIGITAL IN jack of this unit.
Select COAXIAL IN (3) to assign components to the
COAXIAL DIGITAL IN jack of this unit.
] / C
] : iJp/Down H ] /C►]: S