Yamaha YSP-1100 - Manual (Page 62)

USING THE SLEEP TIMER
Use this feature to automatically set this unit to the standby mode after a specified time period. The sleep timer is useful
if you are going to sleep after a certain amount of time while this unit is still playing back a source.
Setting the sleep timer
Each time you press SLEEP on the remote control,
the front panel display changes as shown below.
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
u
SLEEP 120r-un
i
SLEEP 90Eiin
i
SLEEP 60nin
i
SLEEP Z0!')in
^SLEEP OFF
Press SLEEP on the remote control
repeatedly to set the amount of time for the
sleep timer.
Choices: 120min, 90min, 60min, 30min, OFF
The SLEEP indicator in the front panel display
flashes while switching the amount of time for the
sleep timer.
3
Wait for a few seconds without operating this
unit to confirm the setting for the sleep timer.
The SLEEP indicator lights up in the front panel
display, indicating that the sleep timer is activated.
s I /
— SLEEP -
^ I ^
Lights up
SLEEP
SLEEP
Flashes
58
En