Manual setup, Sound menu, Beam menu – Yamaha YSP-1100 User Manual
Page 64: Input menu, Display menu, Sound menu input menu display menu
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To achieve the best quality surround sound, you can use MANUAL SETUP to fine-tune the listening environment
parameters, as well as to make advanced settings for sound signals, sound beams, digital input and the OSD. Change the
initial settings (indicated in bold under each parameter) to reflect the needs of your own listening environment.
• You can save the settings optimized by the AUTO SETUP procedure (see page 36). A set of settings optimized according to specific
conditions of your listening environment can be recalled later depending on the varying conditions of your listening environment (see
• Most of the parameters in SOUND MENU and BEAM MENU are automatically set when you run AUTO SETUP (see page 29). Use
SOUND MENU and BEAM MENU to make additional adjustments.
• BEAM MENU allows you to make settings for the surround sound effects normally available in the speaker settings menu.
• Make settings for the parameters in BEAM MENU first before you make settings for the parameters in SOUND MENU, INPUT
MENU and DISPLAY MENU.
Use to manually adjust various parameters related to the sound output.
Adjusts the output level of high-frequency or low-frequency sound.
Adjusts the various subwoofer settings.
Adjusts the muting level.
Adjusts audio delay.
Adjusts the tonal quality of the listening room.
DD/DTS Dynamic Range
Adjusts the dynamic range of Dolby Digital or DTS signals.
Use to manually adjust various parameters related to the sound beam output.
Adjusts listening room and listening position settings.
Adjusts various beam settings.
Adjusts the sound position of the front left and right channels.
Use to manually adjust various parameters related to the audio and video input.
Assigns jacks according to the component to be used.
Selects the initial input of the source.
Adjusts the input level of the source.
Renames the displayed input source.
Use to manually adjust various parameters related to the display.
Adjusts the brightness of the display.
Adjusts the display position and the background color of the OSD.
Changes the display unit of measurement.