Input rename (input rename), Press ^ ^ to select the desired character, Dimmer set (dimmer settings) – Yamaha YSP-1100 User Manual
Page 74: Standard dimmer (standard dimmer), Auto dimmer (auto dimmer), 3 repeat steps 1 to 3 to rename each input, 4 press enter to exit, 70 en, Display menu
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ INPUT RENAME (Input rename)
Use to change the name of the input source in the OSD
and the front panel display. Press an input selector button
(TV, STB, DVD, VCR, or AUX) to select the component
you want to change the name for and then perform the
[■»I ]/[!>■]: Position
Press <| / [> to place the _ (underbar) under
the space or the character you want to edit.
The _ (underbar) flashes.
Press ^ ^ to select the desired character.
• You can use up to 8 characters for each input.
* Press ^ to change the character in the following
order or press to go in the reverse order:
A to Z, a space, 0 to 9, a space, a to z, a space, #, *,
Use to manually adjust various parameters related to the
SET MENU ^ MANUAL SETUP DISPLAY MENU
^ fl)DIHMER SET
] : Up/Down
■ DIMMER SET (Dimmer settings)
Use to adjust the brightness of the front panel display.
/ [ T ] :
STANDARD DIMMER (Standard dimmer)
Use to adjust the brightness of the front panel display
when you operate this unit by using the control buttons on
the front panel or on the remote control.
Choices: -2, -1,
AUTO DIMMER (Auto dimmer)
If no operation is performed for a specified period, the
front panel display dims. Use to adjust the brightness of
the front panel display in this case.
(the same brightness as the STANDARD
DIMMER setting), -1 to -3 (based on the
STANDARD DIMMER setting), DISPLAY OFF
Repeat steps 1 to 3 to rename each input.
Press ENTER to exit.
The new names are registered, and the display returns
to the previous screen.