Connecting a digital airwave tuner, Audio connections, Video connections – Yamaha YSP-1100 User Manual
Page 24: Cables used for audio connections, Cables used for video connections, Чеж> (r^d)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting a digital airwave tuner
If your digital airwave tuner does not support analog broadcasting, make audio/video connections as shown below.
■ Audio connections
Connect the optical digital output jack of your digital
airwave tuner to the TV/STB OPTICAL DIGITAL IN jack
of this unit. Connect the TV/STB AUDIO IN jacks of this
unit to the analog audio output jacks of your TV in
addition to the optical digital audio connection between
your digital airwave tuner and this unit.
■ Video connections
Connect the video output jack of your digital airwave
tuner to the STB VIDEO IN jack of this unit. If your
digital airwave tuner has component video output jacks,
connect the component video output jacks of your digital
airwave tuner to the STB COMPONENT VIDEO IN jacks
of this unit. Once the component video connection is
made, you can enjoy images with better resolution.
To prevent the optical cable from being unplugged, afifix the optical cable in the supplied cable clamp (see page 15).
Digital airwave tuner
Connect to the analog
audio output jacks of
Rear panel of this unit
You can only
make either a
composite or a
Cables used for audio connections
Audio pin cable
Cables used for video connections
Video pin cable
Component video pin cable