Using manuahadjust function, 2 press my beam on the remote control, Using manual-adjust function – Yamaha YSP-1100 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PLA YING BACK SOUND CLEARL Y (My beam)
Using manuahadjust function
You can adjust the beam angle manually while playing
back an input source. This function is also ideal if the
listening position is out of the operation guarantee range
of the auto-adjust function.
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
Press MY BEAM on the remote control.
MY BEAM is displayed in the front panel display.
Press <| /1> while MY BEAM is displayed to
adjust the angle.
Control range: L90° to R90°
• Press <] repeatedly to increase the horizontal angle
on the left side.
• Press |> repeatedly to increase the horizontal angle
on the right side.