Broadcast report, Broadcast report -12, Maintenance – Xerox 7042 User Manual
Page 118: Reports
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Reports
Broadcast Report
A Broadcast Report prints automatically after a transmission to a
programmed group. All telephone numbers programmed for a
group key print on the report; a group can contain up to 50
numbers. The report provides information about a group
transmission once the transaction completes, and includes the
following information;
•
Group — The group key number. The name of the group
displays to the right of the group number.
•
Job No. — The job number the machine assigned to the
document.
•
No. — The dialing order in the group.
•
Name — The dial directory name associated with the
telephone number.
•
Telephone Number — The telephone number In the dial
directory.
•
Entry — The code and number which describes the dial
directory location of the number. The codes for the
locations are OT for a one-touch number and SD for a
speed dial number.
•
Result — The communication information code. Refer to
the
Maintenance
chapter for a list of the codes.
9-12