Maintenance procedures – Xerox 7042 User Manual
Page 140
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Maintenance Procedures
2.
Remove the developer assembly from the machine. The
following figure shows how to remove the developer
assembly;
CAUTION
Always hold the developer assembly by the green
handles. Do not touch the green drum area or the
black roller. Do not leave the drum unit out of the
machine for an extended period.
Touching the drum or exposing the drum unit to
light could lower the print quality.
3.
Place the developer assembly on a level surface. Cover
the assembly with a clean cloth to protect the drum unit
from exposure to light.
10-18
Advertising