Xerox 7042 - Manual (Page 32)

Copying
Reduction
The machine allows you to select whether to copy documents to
the original size or to automatically reduce the document.
Page size
Resolution
Set the Auto Reduce Copy user option (No. 31) to ON to reduce
all copies. The machine determines the reduction based on the
size of the original and the size of the recording paper. If the
image does not fit on one page, the machine divides the image
onto several pages.
If you set the option to OFF, the machine copies all documents
to their original size.
You can load a document that is up to 279 mm (11 in) wide and
up to 1 m (39.37 in) long. If the document length exceeds this
default limit, the machine displays a document jam. Set the
Document Length user option (No. 22) to increase the allowable
length.
Documents can be copied with the standard or fine resolution
selected. For a normal document, set the resolution to
STANDARD; for a document with fine details, set the resolution
to FINE.
NOTE: If you select the super fine resolution, the machine prints
the document with a fine resolution.
If the Copy Resolution user option (No. 08) is set, all documents
copy with the same resolution: you can not override the option
for a single transaction. Also, if the option is set to STANDARD,
the machine does not copy in the halftone mode. If the option is
not selected, you can set the resolution for each item you copy.
2-2