Programming the dial directory, Programming the died directory, Transmitting – Xerox 7042 User Manual
Page 69
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Transmitting
One>touch dialing
Use the following procedure to transmit a document using a one-
touch key. To use this function, the one-touch key must be
programmed in the dial directory. Refer to the
Programming the
Dial Directory
chapter for information on how to program the
one-touch keys.
1.
Load the document face-down in the ADF.
2.
If desired, select the resolution and the halftone.
NOTE: The resolution may be programmed for the one-
touch key.
3.
If desired, set the page count and press the START key.
4.
Press the one-touch key associated with the number you
want to dial.
Speed dialing
Use the following procedure to transmit documents using a two-
digit speed dial code. To use this function, the speed dial code
must be programmed in the dial directory. Refer to
Programming the Died Directory
for information on how to
program the codes.
1.
Load the document face-down in the ADF.
2.
If desired, select the resolution and the halftone.
3.
If desired, set the page count and press the START key.
4.
Press the SPEED DIAL key.
Enter the two-digit speed dial code associated with the
number you want to dial.
5-7