Xerox 7042 - Manual (Page 88)

Polling - Retrieving Remote Documents
Features
Each polling method prompts you to enter selected features. If
you are storing a document to be polled, you can choose to
transmit in the secure mode. If you are polling, you can poll a
mailbox in the remote machine.
The following procedures instruct you to enter only the options
that their introductions describe. For example, the polling
procedure does not provide a step to enter a mailbox number
since the mailbox polling procedure describes that feature.
Prepare to be Polled (Polling Standby Mode)
Before a remote machine can poll your machine, you must
prepare your machine to be polled. You can program the
machine to delete the document or retain the document after it is
polled. Retain the document to allow several remote users to
poll for the document. Once you store a document, the machine
is in the polling standby mode.
The machine can store one document in the polling standby
mode. For multiple documents, place the documents in
mailboxes and request that the remote user retrieve the
documents from the mailboxes. The remote user must know the
mailbox number to retrieve a document. Contents in a private
mailbox are deleted once the mailbox is polled; documents in a
public mailbox are retained.
Use the following procedure to store a document to be polled:
1. Load the document face-down in the ADF.
2. If desired, select the resolution and the halftone.
3. Open the access panel.
4. If desired, set the page count and the secure mode and
press the START key.
5. Press the POLL/STORE FOR POLLING key.
6. Press the REDIAL/1 key or the PAUSE/
^
key and close
the access panel.
7-2