Xerox 7042 - Manual (Page 41)

Programming the Machine
User option descriptions
The following list briefly describes each user option;
• Activity report (No. 00) — Determines whether the
machine automatically prints an Activity Report after every
32 transactions. If this option is set to OFF, the machine
does not automatically print the report; however, the
report can be printed manually. This option is not
available in some countries.
• Transmission report (No. 02) — Determines whether the
machine automatically prints a Transmission Report after
a transmission. If this option Is set to ON, the machine
prints the report after each transmission. If this option is
set to OFF, the report does not print. If this option is set
to ON ERROR, the report prints only when an error
occurs during a transmission.
• Listen to ring (No. 03) — Determines if the machine
sounds a ring for an incoming call.
• Auto Answer (No. 04) — Determines if the machine
automatically answers incoming calls.
• Auto rev In man mode (No. 05) — Selects whether the
machine automatically answers a call when the machine
is in manual answer mode. This option is not available or
is a service parameter in some countries.
• Man mode rev delay (No. 06) — Determines the number
of rings (2-12) before the machine answers a call when
the machine is in the manual answer mode. This option
is not available in some countries.
• Resolution default (No. 07) — Sets the default resolution
for transmissions.
• Copy resolution (No. 08) — Sets the resolution for
copying.
• Header print (No. 10) — Sets the header location. If the
header is turned OFF or if the logo or terminal ID are not
programmed, you must transmit a cover letter with the
document to identify your machine to the remote user.
This option is not available In some countries.
3-7