Xerox 7042 - Manual (Page 86)

Receiving
Secure Receive (Junk Mail Eliminator)
To receive a document using the secure receive mode, the
remote machine must be a 7041/7042 machine.
When you receive a document in the secure mode, the machine
compares the password you programmed with the password of
the remote machine. If the passwords match, the machine
accepts the document from the remote machine. If the
passwords conflict, the operation is cancelled and the machine
generates an error code.
To receive all documents in the secure mode, set the Junk Mail
Eliminator user option (No. 16) to ON. This option prevents
users from sending junk mail to your machine. Refer to the
Programming the Machine
chapter for information on how to set
the user option.
Power Save Mode
The power save mode is a feature which disables the printer and
reduces power consumption. When you use the power save
mode, the machine stores in memory any document it receives.
After the communication completes, the machine enters the
warmup mode, prints the document, then disables the printer.
If the memory is almost full, you can not enter the power save
mode. If the memory becomes full while the machine is
receiving, the machine prints only the pages it received
successfully.
Use the following procedure to enter or to exit from the power
save mode:
1. Open the access panel.
2. Press the POWER SAVE key and close the access panel.
3. Press the REDIAL/ T key to toggle between the power
save on mode and the power save off mode.
4. Press the START key to select the mode.
6-4