Xerox 7042 - Manual (Page 29)

Features
Program mode
The LCD displays prompts for programming when the machine
is in the program mode. The following information is displayed:
Programming — The LCD displays PROGRAMMING on
the first line.
Item being programmed — The option name, the dial
directory entry, or the settings you are programming.
Operation instructions — The LCD prompts you with
instructions to program an operation. The following table
shows the symbols that the machine uses to prompt you
to enter information:
Table 1-4: Programming
Symbols
Symbol Meaning
Ir
Î
These arrows are shown on the REDIAL/1 key
and the PAUSE/ i key. Use these keys to scroll
through the menu items.
These arrows are shown on the # key and the *
key. Use these keys to move across the
display.
<l> This symbol represents the START key. Use
this key to enter information or select menu
items.
—
This symbol represents the column at which the
user enters the data.
Copy mode
When the machine is in the copy mode, the LCD displays
information about the machine status as the machine prints
single or multiple copies of the document. When in the copy
mode, the following information is displayed:
Single copies
information: The LCD displays the following
— The LCD displays COPY.
— The page count. The number of pages the machine
copied.
1-15