Programming the dial directory – Xerox 7042 User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programming the Dial Directory
Clear a speed dial code
Use the following procedure to clear a speed dial code:
1.
Open the access panel.
2.
Press the PROGRAM key.
3.
Press the PAUSE/
4-
key once to display SPEED DIAL.
4.
Close the access panel and press the START key. The
LCD prompts you to enter or to clear a speed dial code;
SPEED DIAL
ENTER SO/CLEAR
5.
Press the CLEAR key. The LCD prompts you to enter the
speed dial code.
6.
Enter the two-digit speed dial code you want to clear. The
LCD displays:
CLEAR OK?
<>
SDOliID name
7.
To verify the cancellation, press the START key. To
return to step 5 without clearing the speed dial code,
press the CLEAR key.
8.
Perform steps 5 through 7 for each speed dial code you
want to clear.
9.
Press the STOP key. The machine goes to the standby
mode.
4-10