Maintenance procedures – Xerox 7042 User Manual
Page 142
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Maintenance Procedures
Developer assembly
6.
Separate the drum unit from the developer assembly.
The following figure shows the drum unit and the
developer assembly:
7.
Cover the drum unit with a clean cloth to protect the unit
from exposure to light.
8.
Place the developer assembly over paper to protect the
surface on which you are working.
9.
Use a cotton swab to clean above the mylar sheet of the
developer assembly. The following figure shows how to
clean the mylar sheet:
10-20
Advertising