Delayed transmission, Program a delayed transmission, Delayed transmission -13 – Xerox 7042 User Manual
Page 75: Program a delayed transmission -13, Transmitting
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Transmitting
Delayed Transmission
Transmitting a document at a programmed time is known as a
delayed transmission.
You can program up to eight jobs to transmit on a delayed basis.
A job can be a transmission to a single destination, a broadcast
transmission, or a polling operation.
Use delayed transmissions to send documents during hours with
the lowest telephone rates, such as evenings and weekends.
Program a delayed transmission
Use the following procedure to program delayed transmission:
1.
Load the document face-down in the ADF.
2.
If desired, select the resolution and the halftone.
3.
Open the access panel.
4.
If desired, set the page count and press the START key.
5.
Press the DELAYED START key. The LCD displays
DELAYED START MODE.
6.
Close the access panel and press the START key. The
LCD prompts you to enter the delayed send time.
7.
Enter the time (24-hour format) to transmit. The LCD
prompts you to verify the time to transmit.
8.
Press the START key. The LCD prompts you to dial the
telephone number.
9.
Dial the number you want to call.
5-13