Programming the dial directory – Xerox 7042 User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programming the Dial Directory
5.
Enter the telephone number using the control panel
keypad. As you enter the digits, the cursor automatically
moves to the next position. Press the PAUSE/ i key to
enter a pause (displayed as a hyphen).
6.
Verify the number you entered. To change a digit, press
the CLEAR key to back up over and delete the numbers,
then reenter the digits.
7.
Press the START key. The LCD prompts you to select or
to skip the full-program mode:
FULL PROGRAM
t=SET += CLEAR
To bypass the full-program mode or to delete the settings
for a key you are modifying, press the PAUSE/ 4- key and
continue with step 9. If you are modifying a one-touch
key, the settings return to their default values.
To program the full-program items, complete the
following:
a.
Press the REDIAL/1 key to select the full-program
mode. The LCD displays the first full program item.
b.
Press the REDIAL/ f key to scroll through the
function codes for the item.
c.
To select a code, press the START key.
d.
Perform steps b and c for each of the five items in
the full program mode.
NOTE: If you select ON for the mailbox number, the LCD
prompts you to enter a four-digit number. Once you enter
the digits, the LCD prompts you to verify the mailbox
number. Press the START key to continue.
When you complete all the items, the LCD prompts you to
enter the dial directory name for the one-touch key.
4-5