Duplicating, Connecting with another vcr, Operation – Aiwa HV-MX100U User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Duplicating
C o n n e c t i n g w i t h a n o t h e r V C R
(Front)
HV-MX100 (Recorder)
(Rear)
If another VCR is monaural type, connect one of the audio plugs only to AUDIO IN L
[MONO],
O p e r a t i o n
O
REC/O TR
2 1 ENGLISH
Before Starting
• Check that the REC SYSTEM button corresponding to the color system in which
you want to record is pressed.
• Select the tape speed.
1
Insert a pre-recorded source cassette into another (playback)
VCR.
2
Insert a blank cassette with its erasure prevention tab in place
into yOur HV-WIX100 (recording) VCR.
3
Press INPUT to display “LINE 1” (rear) or “
l
I
ne
2” (front) on the
TV screen.
4
Set the other VCR to playback.
5
Press • REC/OTR on the recording VCR.
Duplicating begins.
Connecting the equipment with a 21-pin scart connector
You can connect other equipment with a 21-pin scart connector in Europe. See
page 27.